TLC Sprayer
Instruction manual, May-18
4
CAMAG only. The warranty is voided if parts from other sources are used. Check
the service manual before you start service to reduce product-specific risks
•
If the instrument is found to be defective, it must be switched off and steps must
be taken to ensure that it cannot be switched on by mistake
•
If liquids penetrate the inside of the instrument, the power has to be disconnected
immediately. Small amounts of liquid can be wiped off and/or dried by means of a
hairdryer, with larger amounts of liquid a service technician has to be called. A test
of functionality has to be performed in all cases
•
Carry out all safety checks and the preventive maintenance as recommended by the
manufacturer in order to assure your personal safety and the full functionality of
the instrument. Have an authorized service specialist perform any service not
described by this manual
•
See original manufacturers' manuals for further safety data on third party
equipment supplied with the system
•
The safety of any system incorporate with the equipment is the responsibility of the
assembler of the system
•
This symbol indicates that this equipment must not be disposed of as unsorted
municipal waste but is to be collected separately as electrical and electronic
equipment (WEEE-Directive 2002/96/EC). To properly recycle the instrument or
parts of it you are requested to send the equipment back to the distributor,
producer or an adequate collection system at the end of its life. This will have
potential effects on the environment and human health
1.3
Parts supplied/Accessories/Consumables
The following items are supplied with the CAMAG TLC Sprayer (basic setup), order
number 022.6530:
Cat. No.
Quantity
Description
100.6531
1
Charger unit
100.6532
1
Pump unit with bottle clamp and
mounted compressed air connector
746.6535
1
Spray head type A
746.6536
1
Spray head type B
960.0140
1
Reagent bottle 100ml with cap
960.0145
1
Reagent bottle 50ml with cap
B.022.6535
1
Instruction manual
