background image

Thank You...

.....for selecting our products.  Our personnel have proudly made every effort to ensure that your new
Pressure Washer is of the quality that you expect.  But things do occasionally go wrong.  This is why
every pressure washer is covered by a limited warranty.  Among other things this warranty provides for
the replacement of parts found to be defective during the operation of your new pressure washer.
Please note that the owner/operator has certain obligations under the terms of the warranty.  Be sure to
read this manual for directions on proper installation, start-up, use and storage of your pressure washer.

Your new Pressure Washer was tested after production for proper pressure and flow. This process will
leave a water residue in the pump sometimes.  The dealer that you have purchased your new machine
from should review with you the proper installation, start-up, use and storage.  Most “Big” problems
occur when shortcuts are taken in one of these processes.  If a problem occurs you need some assis-
tance with please feel free to contact us at the listing below:

Warranty Service Center

520 Brooks Road

Iowa Falls,  IA 50126

1-800-648-6007

Be familiar with the model plate located on your machine.  Have the model and code number
with you when you call for service.

Statement of Warranty

The manufacturer of this pressure washer agrees to repair or replace designated parts that prove

defective within 1 year from date of original purchase.  Specific limitations and exclusions apply.  To
make claim under the terms of the warranty, all parts said to be defective must be returned to the
Warranty Service Center listed above for warranty inspection.  The judgements and decisions of the fac-
tory personnel concerning the validity of warranty claims are final.  Items not covered by the warranty
given us include:

Motors, Engines and Pumps:  These components are covered by warranties given by their

respective manufacturers.  These warranties pass through to the end user.  As a factory authorized and
trained warranty service center the factory will honor the terms of all component warranties and satisfy
claims of the appropriate warranty provisions.  

Normal wear items are not covered by this warranty,  hoses, nozzles, filters, valves and

seals are considered normal wear items and are not covered by this warranty.

This warranty does not cover the following:  machines used for rental purposes, damage result-

ing from shipping, accident, abuse, or acts of God, misuse or neglect.  Neither is damage from repairs
or alteration performed by non-factory authorized personnel or failure to install and operate equipment
according to the guidelines put forth in the instruction manual.

The manufacturer will not be liable to any persons for consequential damage, for personal injury

or for commercial loss. 

Summary of Contents for 1000MX










Reviews: