Power Supply
This camera must always be operated by a AC24V(Optional)
or DC12V Certified/Listed, class 2 power supply only.
Note :
Line Lock only with AC 24V cameras will not
work with DC 12V.
Handling of unit
Be careful not to spill water or other liquids on the unit.
Be cautious not to get combustible or metallic material
inside the body. If used with foreign matter inside. the camera
is liable to fail or cause a fire or an electric shock.
Operating and storage
Do not point camera of view directly to light source(CCD
sensor will be damage). Avoid operating or storing the
unit in the following locations.
·
Extemely hot or cold places (operating temperature
-10
℃
~ 50
℃,
however, we recommend that the
unit be used within a temperature range of 0
℃ ~
45
℃)
·
Assumes no wind chill factor
·
Damp or dusty place
·
Places exposed to rain
·
Places subject to strong vibration
·
Close to generators with powerful electromagnetic
radiation such as radio or TV transmitters.
Cleaning of the unit
·
Remove dust or dirt on the surface of the lens with
a blower.
·
Use a dry soft cloth to clean the body. If it is very dirty,
use a cloth dampened with a small quantity of neutral
detergent, then wipe dry.
·
Avoid the use of volatile solvents such as thinners,
alcohol, benzene, and insecticides.
They may damage the surface finish and / or impair
the operation of the camera.
【
1
】
Lens mount cap
The cap is installed to protect the lens mount section.
Remove the lens mount cap before installing a lens.
(sold separately)
【
2
】
Camera installation bracket
The bracket can be fixed at the top or bottom of
the camera. (page 18)
08
09
CAUTIONS FOR SAFE OPERATION
PART NAMES AND FUNCTIONS
【
1
】
【
2
】