www.calspas.com
21
24
www.calspas.com
25
2019 Portable Spa
LTR20191000, Rev. K
www.calspas.com
Cleaning Your
Chill
Spa
Spa Cover and Pillows
Due to the constant punishment your spa cover and pillows receive, you should protect them by applying a vinyl and
leather cleaner as part of your monthly maintenance plan. Use a product that is specifically designed to protect spa
covers and pillows from chemical and ultraviolet light damage without leaving an oily residue behind that is normally
associated with common automotive vinyl protectants.
Warning:
Do not
use automotive vinyl protectants on spa covers or pillows. These products are generally oil-based
and will cause severe water clarity issues that are difficult to correct.
Spa Shell
Each time you drain your spa, before you refill it you should clean your spa shell with an all-purpose cleaner and apply
a coat of surface protectant.
Use a low detergent, non-abrasive cleaner specifically formulated to clean the spa without damaging its acrylic finish.
Use a non-oil based surface protectant that is specifically formulated to protect the spa’s finish from the chemicals and
minerals associated with normal spa use.
Using the Freedom Sound System
2.0
The Freedom Sound System
™
entertainment option contains a Bluetooth-enabled speaker system that is available for certain
Cal Spa models. Any Bluetooth-enabled device can be used to play audio through your spa.
Before you can use the sound system, you need to pair the Bluetooth module with your device. The Bluetooth module is
installed within the spa cabinet. Everything can be done with your device. The example shown below is from an iPhone
device. Your device may appear differently. Before you begin, make sure Bluetooth in enabled on your device.
1.
Select Bluetooth from your device’s option list.
2.
Select
AQUATIC AV
...
from the list of available devices to pair.
3.
Your iPhone device will ask for a code: the code is 0000.
4.
Allow your device to pair with the spa’s Bluetooth module.
5.
When the devices have been connected, the device
AQUATIC AV
...
will be
highlighted.
Only one Bluetooth device can be paired with the Freedom Sound System
™
at
any time.(For Android users, the systems will pair automatically - no code is needed.)
Once your device is paired and connected, all sounds from your device will be played through the sound system,
including system sounds and telephone.
The sound system can also appear as SWA8-6BT, its factory default
name.
1
2
3
4
