Gazebo Owner’s Manual
www.calspas.com
OD-100 Assembly
The assembly of this sauna will require no less than three people. The panels, roof top and roof assembly
are heavy and difficult to lift with by only one person.
The following steps refer to Figures 7, 8, and 9.
1.
Assemble the bench. Screw the legs into the underside cross-support of the bench (Figure 7). After
assembling the bench, place the bench on the wooden flooring of the sauna.
2.
Place the heater bottom support on the front left corner and the place the heater on top of the heater
support.
3.
Place the wall panels against the flooring and attach the panels (with the provided screws) to the
flooring. Attach the center pieces and place between the two front and two back panels. Then place
the corner piece and attach it to the wall panels. Repeat these steps, as necessary, to complete the wall
assembly.
Figure 7. OD-100 assembly
Page 15
Assembling Your Sauna
12/17/04
