![background image](http://html1.mh-extra.com/html/calrec/apollo/apollo_installation-and-technical-manual_3521162120.webp)
120 APOLLO
Digital Broadcast Production Console
Specifications
HYDRA2 MODULAR I/O
Power
The operating AC voltage is 100-240V +/-10%, 50-60Hz.
Modular Hydra2 I/O frames are fitted with dual power supplies and have 2 IEC mains input
connectors. Units will be fully functional on one PSU, however both should be fed where
possible from separate sources to provide redundancy against both PSU failure and external
power loss.
The peak inrush current is limited (cold start). This reduces the chance of a nuisance trip or fuse
blow from power up. The RMS quiescent and peak inrush current figures are dependent upon
the quantity and type of I/O cards fitted. Please refer to the Hydra2 installation manual for more
details on modular I/O.
Heat Output & Efficiency
The Heat output from modular Hydra2 I/O boxes depends upon the quantity and card types
fitted, please refer to the Hydra2 installation manual for more detail on modular I/O.
Cooling
Fans mounted to the PSUs at the back of the core draw air through the PSUs and the core
itself. Air is drawn up through the base of the core which is recessed to allow air to enter through
the side, and for the units to be mounted with no clearance above or below. The bottom of the
sides of the modular I/O box should be unobstructed with at least 50mm (2') clearance to allow
airflow. The same amount of clearance should be provided at the rear of the core to allow the
fans to vent adequately. Both fans will continue to run (and therefore cool the card-frame) in the
event that one of the PSU's fails or loses its' AC mains source.
Modular I/O units may be mounted in an open bay providing the ambient air temperature is within
limits (see below). The units may also be housed in air conditioned bays.
Acoustic Noise
Dependent on loading, typically <28 dB SPL (A-weighted, 1m from front).
Operating Ambient Air
Temperature
0ºC - 35ºC.
Relative Humidity
5% - 80% Non-condensing.
Summary of Contents for Apollo
