6
THE ADD LIQUID FUNCTION
ActiveSense Technology™ has the ability to sense when there is not enough liquid in the jar to properly
blend. If the blender senses this issue, it will stop blending and display an “Add Liquid” notification. Add
more liquid and press the Start/Pause button to resume blending.
USING THE MANUAL SETTINGS
Your ActiveSense® blender contains three MANUAL SETTINGS. These Manual Settings vary in blending speed
from LOW to HIGH.
• To use the MANUAL SETTINGS, press a Manual Control button (High, Med, Low) and press the START/PAUSE
button.
• To stop the blending cycle, press the START/PAUSE button again.
USING THE PULSE FUNCTION
• Use the PULSE button to crush ice or chop food.
• To use the Pulse function, press the PULSE button to activate the blender. Release the PULSE button to stop.
USING THE BLEND-N-GO® CUP
Your ActiveSense® blender contains a Tritan™ Blend-N-Go® Cup.
• Place the blade into the Threaded Jar Bottom.
• Place the Sealing Ring over the blade assembly. Carefully press and tuck the Sealing Ring into the locking
groove. Refer to page 5 for detailed instructions for blade assembly.
• Put ingredients into the Blend-N-Go® Cup.
• Secure the blade assembly to the Blend-N-Go® Cup before placing onto the Motor Base.
Note:
To turn off the ActiveSense® blender, press the POWER button. This appliance is pre-programmed to
turn off automatically if not used for several minutes. All lights will turn off when the unit automatically
powers down.
