GB
BS...IMAT Rev2 - Operating Instructions
Page 3 / 12
1.2. Manufacturer name and address
Manufacturer’s name:
Calpeda Ltd
Address:
6-8 Wedgwood Rd Ind Est
Bicester OX26 4UL, UK
www.calpeda.co.uk
1.3. Authorized operators
The product is for qualified operators upon final
users and specialized technicians. (see above).
i
It’s forbidden for the final user to do any
operation reserved only for the authorized
technicians. The manufacturer isn’t
responsible for the related damage done by
missing this prohibition.
1.4. Warranty
Warranty covers all defects within the booster set
resulting from faulty workmanship and/or materials
for a period of two years from the date of installation
or 30 months from the date of dispatch from our
production centre, whichever is the shorter.
i
The warranty covers the replacement or
repair of the faulty parts and labour to do so.
It does not cover any secondary loss, costs
associated with the removal, returning or
refitting of the set.
Under no circumstances should the faulty
equipment be dismantled. Failure to comply could
invalidate the warranty.
The warranty may be lost in these cases:
- Whenever the use of this product is different from
its intended use described in this manual.
- Defects arising from incorrect installation and/or
operation.
- In case of modifications or customizations made
without the authorization of the manufacturer.
- In case of technical assistance operations made
by non-authorized personnel.
- In case of missing maintenance (described in this
manual).
1.5. Technical assistance
Any further information on documents, service
assistance, and device parts, please contact:
Calpeda Ltd
6-8 Wedgwood Rd Ind Est,
Bicester OX26 4UL, UK
T:+44 1869 241441 F: +44 1869 240681
W: www.calpeda.co.uk
2. TECHNICAL DESCRIPTION
Constant pressure booster sets with built-in
frequency converter made with multiple pumps,
ball valve, non-return valve and pressure gauge on
discharge side, ball valve on suction side.
EASYMAT – Domestic and Commercial use
I-MAT – Domestic, commercial and industrial
2.1. Intended use
For clean liquids: non-explosive and non-flammable,
non-hazardous for health or the environment, non
aggressive for booster set materials, not containing
abrasives, solid or fibrous particles.
Liquid temperature from 0 °C to + 40 °C in line with
the regulation.
2.2. Expected improper use
The device is designed and manufactured
exclusively for the purpose described in sec. 2.1.
Improper use of the device is forbidden, as
is use under conditions other than those
indicated in these instructions.
Booster sets must not be used in hazardous
areas as they could cause an explosion if
there is the danger of ignition by a flame
path.
It will be not accepted liability for the use of our
sets with liquids which could be construed as being
hazardous to health either by touch, ingestion, or
inhalation of fumes or gases given off by the liquid.
Calpeda cannot be held responsible for failures
or injuries related to the inobservance of the
restrictions described.
2.3. Marking
The following picture is a copy of the name-plate.
1) Type
2) Working pressure
3) Total power
4) Control panel
5) Weight
6) Certifications
7) Serial number
3. TECHNICAL CHARACTERISTICS
Dimensions and weight (see technical catalogue).
Protection IP54 (depending on pump model)
Supply voltage / Frequency:
EASYMAT 230 V1~50 Hz
I-MAT 400V3~50 Hz
Sound pressure: refer to individual pump data
Maximum permissible pressure: up to 10 bar
depending on model.
3.1. Operating conditions
The product works properly only if the followings
conditions are respected.
Floating voltage rate: +/-10% max
Floating frequency rate: +/- 4% max
Ambient temperature: up to 40°C
Relative Humidity: up to 90% without condensing
Altitude: Below 1000 m inside a building.
i
Booster sets must be used in conjunction
with a cold water storage tank and must not
be connected direct to mains in-line with
water byelaw regulations.
3.2. Product overview
The booster set is generally made of:
