•
Silicone Sealant.
Exterior grade silicone used to waterproof the
junction box cover plate.
•
Control System
. Supplied by CalorIQue, automatically turns
the system on and off based on the temperature and presence
of precipitation. UL Listed and CSA Certified.
•
Specification Sheet
. Provides specifications for all skid plates
included with the system.
•
Product Labels
. Provide information about the system that
may be required during future remodeling or repairs.
•
Warrantee Card.
This card must be filled out and returned to
CalorIQue to ensure proper registration of the warrantee.
Typical system wiring layout.
Preparation
•
If necessary, level worn or damaged loading docks with quick
setting leveling compound.
•
Install and supply power to a junction box located conveniently
for connection to the CalorIQue Heated Skid Plate(s). Make
sure that power is turned off at the distribution panel before
installing this system.
•
Install control system according to the separate instructions.
•
Using an accurate ohm meter, test each skid plate to ensure
that it is within the limits shown on the specificatasdfasdfion
sheet.
Installation
•
Drill Holes to Accept Expansion Shields
Using the skid plate as a template, mark and drill holes for the
expansion shields.
TIP:
Since the exact hole locations may differ from plate to plate, label
each dock area and plate and use the appropriate skid plate to mark
the hole locations.
Place skid plate(s) based on their junction box type, and the type of
railing or edge work.
•
Insert the Expansion Shields into the Holes.
•
Mount the Skid Plate(s). Repeat the following for each plate:
• Apply construction adhesive to the loading dock.
Junction Box
Style
B
Junction Box
Style
A
Wall or
Railing
Junction Box
Style
A
Railing
Skid Plate(s)
Power Distribution Panel
Control Box
Sensors
