
16
Setting the Clock and Timer
Setting Clock
1.
Press CLOCK pad.
• “TIME” displays.
2.
Press
or
pad until correct time of day is
displayed.
3.
Press OVEN CANCEL pad to set time.
• If OVEN CANCEL pad is not pressed,
approximately 30 seconds after last entry, “TIME”
disappears and time is set.
Setting Minute Timer
1.
Press TIMER ON/OFF pad.
• “TIMER” displays.
2.
Press
or
pad until desired amount of time is
displayed.
• Timer can be set from 5 seconds to 9 hours and 50
minutes.
• Timer begins counting down automatically.
3.
When time elapses timer beeps 3 times then
approximately once every 6-8 seconds.
• Press TIMER ON/OFF to cancel beep but remain in
timer mode.
Canceling Minute Timer
Press and hold the TIMER ON/OFF pad for approximately
3 seconds.
• When canceling minute timer do not press OVEN
CANCEL pad. Pressing OVEN CANCEL pad
cancels cooking function.
Adjusting Factory Set Baking Temperature
Your new range oven is calibrated at the factory for
temperature. However, due to individual variances and
preferences, it may be necessary to adjust individual
ovens once they have been installed.
When first using the oven, follow recipe times and
temperatures. Before adjusting oven baking temperature,
test a recipe by using a temperature set higher or lower
than the recommended temperature. The baking results
should help you decide how much adjustment is needed.
Prior to adjusting the baking temperature, check for
blocked heat vents. Remove aluminum foil from oven—it
will alter oven temperature. If it still appears the oven is
not performing as expected, a calibration may be done.
An accurate digital thermometer is necessary to calibrate
oven. Store purchased oven thermometers do not
measure oven temperature accurately.
To change oven temperature through oven control:
1.
Push BAKE pad.
2.
Push up or down arrow pad until an oven temperature
more than 500°F shows.
3.
Immediately push and hold BAKE pad until “00”
shows (approximately 5 seconds).
4.
To decrease oven temperature (for a cooler oven),
Push down arrow pad until negative numbers appear.
Oven can be adjusted from -05° to -35° lower. To avoid
over adjusting oven move temperature -5° each time.
5.
To increase oven temperature (for a warmer oven),
Push up arrow pad until positive numbers appear.
Oven can be adjusted from 5° to 35° higher. To avoid
over adjusting oven move temperature 5° each time.
6.
Push OVEN CANCEL button. Temperature
adjustment will be retained even through a power
failure.
TIMER
ON/OFF
CLOCK
STOP
TIME
COOK
TIME
OVEN
CANCEL
CLEAN
BROIL
BAKE
O
N
CLEAN
BROIL
LOCK
DELAY
OVEN ON
CLEAN
STOP
TIME
BAKE
OVEN
LIGHT
CONVECTION
STANDARD