10
1002595 ISSUE 5 M172 VARIHEAT
VARIHEAT AA SYSTEM OWNER INSTALLATION MANUAL
SECOND HOME SCREEN
4. Fresh air setting (where optional fresh air module is fitted)
AUTO (recommended) allows automatic control of fresh air quantity
according to control system settings. MIN allows experienced operators
to override automatic fresh air control and force the minimum fresh air
quantity. MAX allows experienced operators to override automatic fresh
air control and force the maximum fresh air quantity.
5. Occupied/Unoccupied override
Normally set to AUTO, allowing the time clock to control the Occupied
and Unoccupied periods of the Variheat. The left-hand button sets the
Variheat into Occupied mode. The right-hand button sets the Variheat
into Unoccupied mode. If remote control of Occupied/Unoccupied is to be
used, this control should be set to Unoccupied. (See page 12.)
6. User settings
Allows the user to change the settings of the Variheat (user pin code
required to access).
7. Service engineer settings
These settings are for Dantherm Group service engineers and are
password protected.
Functions on the second home screen can be modified if allowed by the User
Security Mode settings. (See page 20.)
USER SETTINGS
– PIN CODE
REQUIRED
SERVICE ENGINEER
SETTINGS –
PASSWORD
PROTECTED
FRESH AIR
SETTING
BUTTONS
OCCUPIED/
UNOCCUPIED
OVERRIDE
Summary of Contents for Variheat AA1200
Page 2: ......
Page 69: ...69 1002595 ISSUE 5 M172 VARIHEAT...
Page 70: ...70 1002595 ISSUE 5 M172 VARIHEAT...
