21
1006905 ISSUE 2
4�2 OPERATING INSTRUCTIONS
IMPORTANT
Remember that at start-up there is a 3 minute time delay before the heat pump starts
a� Power On
Press the
to power on. Press
again to put
heat pump in standby mode.
b� Temperature Setting
Press the
p
or
q
buttons to raise or lower the
temperature. The
SET
symbol will flash.
To save the changes press the
SET
button.
c� Heat mode selection
The default setting for the heat pump is heating. If you
require cooling or automatic heat/cool options, please
instruct your installer to activate these.
When in heating mode the
symbol is displayed.
When in cooling mode the
symbol is displayed.
d� Defrosting
This is an automatic function. When heat pump is
defrosting the
symbol will appear. It will disappear
when defrost is complete.
e� Clock setting
Press the
to enter the timer settings. The
icon will flash. Press
M
to set hour with
p
and
q
.
Press
M
again to set minute with
p
and
q
.
Press
SET
to save settings.
f� Timer setting
The programmable timer allows for the heat pump to
run for three timed periods in one day.
Each period can be set, but an ON and OFF time needs
to be set for each.
Press the
to enter the timer settings.
The
icon will flash, displaying the actual time.
Press
again to enter timer. Press
M
to set hour
with
p
and
q
. Press
M
again to set minute with
p
and
q
. If you need to cancel timer settings, press
M
and ‘--:--’ will display.
Press
SET
to save settings and enter into the next
group of timer setting,
To enter then next timer settings without saving,
press
.
If you need to cancel timer settings, press
M
and
‘--:--’ will display.=
