Page 35
SD092750 ISSUE 34
Warranty Conditions
The following exclusions apply to the Warranty given by Calorex Heat Pumps Ltd. No claims
will be accepted if :-
1.
The heat pump is incorrectly sized for the application.
2.
The heat pump is installed in ay way that is not in accordance with the current procedures as defined
by Calorex Heat Pumps Ltd.
3.
The heat pump has been worked upon or is adjusted by anyone other than a person
authorised to do so by Calorex Heat Pumps Ltd.
4.
The air flow to and from the machine is outside the specified limits.
5.
The water flow through the machine is outside the specified limits.
6.
The water pH level and/or chemical balance is outside the following limits:-
7.
The heat pump has suffered frost damage.
8.
The electrical supply is insufficient or in any way incorrect.
9.
The fan amps and duct pressure are outside the specified limits.
10.
The heat pump must be maintained to the service requirements on page 37.
For details of extended warranty and maintenance packages available to United Kingdom customers please
call the service number below.
IF IN ANY DOUBT PLEASE ASK
Note:- The Reply Paid Warranty Registration Card must be returned, to ensure that the
correct warranty is given. If you do not find a Registration Card with your Heat Pump please contact the
Calorex Service Department giving your name, address and serial number of your heat pump. A card will
be sent to you for completion.
Email service @ calorex.com
Web Site http://www.calorex.com
01621 857171 01621 856611
Please give MODEL NUMBER and SERIAL NUMBER of your heat pump when making technical or
service enquiries. This will assist in correct diagnosis and ensure service can be provided with the
minimum delay.
Acidity pH
pH
7.2 - 7.8
Total Alkalinity, as CaCO
3
ppm
80 - 120
Total Hardness, as CaCO
3
ppm
150 - 250
Total Dissolved Solids
ppm
1000
Maximum Salt Content
ppm
8000
Free Chlorine Range
ppm
1 - 2 Domestic
Free Chlorine Range
ppm
3 - 6 Commercial
Superchlorination
max
30ppm for 24 hrs
Bromine
ppm
2 - 5
Baquacil
ppm
25 - 50
Ozone
ppm
0.9 Max
Maximum Copper Content
ppm
1
Aquamatic Ionic Purifier
ppm
2 Max
