CALOR SC50LPGW, Operating And Installation Instructions, Page: 25 / 28

Burner Caps :
Periodically, the enameled pan supports, enameled covers and burner heads must
be washed with soapy warm water rinsed and dried. After drying them thoroughly,
replace them correctly
.
Enamelled Parts :
In order to maintain these parts, it is necessary to clean them frequently with mild
warm soapy water and then dry with a cloth. Do not wash them while hot and
never use abrasive powders or abrasive cleaning materials. Do not leave vinegar,
coffee, milk, salt, water, lemon, or tomato juice to remain in contact with enameled
parts for long periods of time
.
Stainless Steel :
Stainless steel parts must be cleaned frequently with mildly warm soapy water and
a soft sponge and then dry with a soft cloth. Do not use abrasive powders or
abrasive cleaning metarials. Do not leave vinegar, coffee, milk, salt, water, lemon
or tomato juice to remain in contact with stainless steel parts for long periods of
time
.
22
5. Part : CLEANING AND MAINTENANCE
5.2 Maintenance
Other Controls
Periodically check the gas connection pipe. Even if any simple abnormality is felt, inform the
technical service to have it changed. We recommend the gas connection parts to be changed once
a year. If any abnormality is felt while operating the control knobs of cooker, contact to the
authorized service.
Change Battery
WARNING! After unpacking, install the battery in the battery box as explained below. The battery
is placed in the document bag.
1. The battery is located on the left hand side of the front plinth.
2. To gain access to the battery, open the main oven door and lift up
the battery holder lid.
3. Fit the new battery ensuring (+) terminal is next to the (+) sign on
the battery.
4. Close the lid of the battery holder.