INTRODUCTION
Thank you for purchasing a boiler from the Calomax Eclipse range.
All our products are designed to give years of simple, reliable operation.
To ensure this, it is important that the installation and subsequent
servicing and maintenance is carried out by a suitably qualified engineer
in accordance with these instructions.
For assistance in finding a suitable engineer in your area, visit our
website www.calomax.co.uk, contact our service department on
0113 249 6681 or e-mail: [email protected]
CHECK LIST
This product conforms to the CE marking directive
93/68/EEC through compliance with the following
standards:
- Electromagnetic Compatibility Directive
- Low Voltage Directive 73/23/EEC in accordance
with:
- BS EN 60335-2-75: 2004+A2: 2008
- BS EN 60335-1: 2012+A11: 2014
Compliance with these standards has been confirmed
through testing by an independent NAMAS approved
body.
APPROVALS
Before commencing installation, check that the following parts have
been supplied with the boiler:
1. WRAS approved flexible water inlet hose suitable for potable
water.
2. Drip tray kit
The tap handle, drip tray and cup stand mouldings
incorporate the Steritouch additive and have been
independently tested to prove the effectiveness of
the surface hygiene
Page 3
