4
OVERVIEW OF TOGGLES, COMMANDS, AND FORMATS
For simple Caller ID applications, we suggest the following default toggle setup:
ECXUDASOBKT
The combination of a lower case "
A
" and an upper case "
S
" instructs the unit to send call information at both the
start and end of each call. With upper case "
O
" set, the unit will not report call information on outbound calls. This
combination of toggles gives a simple configuration for Caller ID only applications. The toggles can be configured
in either upper or lower case and combinations set to support various applications such as Popup screens, Call
Accounting, Integrated Voice Response (IVR) applications and Telephony Diagnostics.
Application Notes:
All toggles can be changed by simply sending the new toggle. The unit is designed to accept
one toggle at a time. If a software application sends an initialization string of toggles to the unit, a short pause of at
least 50 milliseconds should be inserted between each toggle so the unit it has enough time to write the entry to non-
volatile memory.
Setup Toggles
This is a quick listing of the setup toggles. A complete explanation of each toggle begins on page 6.
E
Always E
C
$
sign not sent as leading character in data stream & dashes inserted in phone number.
c
$
sign is sent as leading character in data stream & dashes removed in phone number.
X
Always X
U
Internal blocking/passing OFF.
*
Only available on select units.
u
Internal blocking/passing ON. (Block or pass is determined by "
K,k
" toggle).
K
Pass calls until notified by Internal Memory routine ("
u
") or by
W
command.
k
Block calls until notified by Internal Memory routine ("
u
") or by
W
command.
A
Data sent BEFORE and AFTER call.
a
Data sent as defined by "
S,s
" toggle.
S
Data sent at the Start of call only. (If "
a
" set above).
s
Data sent at the End of call only. (If "
a
" set above).
B
Block first ring to output jack.
*
Only available on select units.
b
Block first ring set to OFF.
D
Detail information for call not sent.
d
Detail information sent.
O
Inbound call information sent only.
o
Outbound and Inbound information sent.
T
Always T
