2. Deleting callers
(1) Delete all the paired transmitters
Press "STU" button for 6s to delete all the transmitter buttons
(2) Delete someone transmitter
Press "STU" button for 2s into learning status, then press "UP"
button to select the number want to delete. And then press
"SET" button to delete the transmitter.
3. Vibration settings
Press and hold "SET" button for 2s, the icon in right corner
will flicker. Press "UP" button to adjust the level of vibration.
4. Timing settings
Press and hold "SET" button for 2s again, the hour or minute
position will flicker, then press "UP" button to adjust the time.
5. 2/4-button mode settings
Press and hold "SET" button for 2s again, it enters 2-button mode
or 4-button mode settings.
VII Additional function
1. Low power indication
When the power icon shows empty, please recharge the
battery in time.
2. Wireless interference indication
If there is another RF signal interference source, the icon
will flicker.
is 4-button mode, used for 1/3/4/6-button transmitters.
is 2-button mode, used for 1/2-button transmitters.
4
