GREAT BRITAIN • CUSTOMER SERVICE
tel: 08545 300 9799
e-mail: [email protected] internet: www.clasohlson.com/uk
20131024
I2:35
40
A
L A R M
C
H I M E
A
L A R M
C
H I M E
A
L A R M
C
H I M E
A
L A R M
C
H I M E
LIGHT
Backlight
ST./STP.
LAP/RESET
Stopwatch:
Start/stop/lap
MODE
I2:35
40
A
L A R M
C
H I M E
A
L A R M
C
H I M E
A
L A R M
C
H I M E
A
L A R M
C
H I M E
I2:35
40
A
L A R M
C
H I M E
A
L A R M
C
H I M E
A
L A R M
C
H I M E
A
L A R M
C
H I M E
I2:35
40
A
L A R M
C
H I M E
A
L A R M
C
H I M E
A
L A R M
C
H I M E
A
L A R M
C
H I M E
I2:35
40
A
L A R M
C
H I M E
A
L A R M
C
H I M E
A
L A R M
C
H I M E
A
L A R M
C
H I M E
Product description
Digital wristwatch with alarm, date, stopwatch with split-time and
backlight. Water resistant to 5 ATM.
Buttons
Display
• Normal mode: Hours, minutes, seconds, day.
• Hold in [ST./STP] to display the day, month and date.
• Hold in [LAP/RESET] to display the alarm time in hours and minutes.
• Press [MODE] to switch between normal and stopwatch mode.
Backlight
The backlight illuminates the face, which makes the digits easy to read
in the dark. Press [LIGHT] whenever you need the backlight. The display
lights up for about 4 seconds.
Activating/deactivating the alarm
and hour chime
In normal display mode:
• Hold in [LAP/RESET] and press [ST./STP.] once to activate the chime.
• Hold in [LAP/RESET] and press [ST./STP.] once to activate the alarm.
• Hold in [LAP/RESET] and press [ST./STP.] once to deactivate
the hourly chime.
• Hold in [LAP/RESET] and press [ST./STP.] once to deactivate the alarm.
• The display returns to normal mode when you release [LAP/RESET].
Stopwatch
In normal display mode:
Press [MODE] once in order to activate the stopwatch.
•
Start/Stop:
Press [ST./STP.] to start/stop the stopwatch.
The time is measured in 1/100 second increments.
•
Split time:
Press [LAP/RESET] (when stopwatch is active) once
to display the split time. Time will continue to be taken while
the split time is displayed. Press [LAP/RESET] once to display
the total running time.
•
Reset to 0:
Press [ST./STP.] to stop the stopwatch and then press
[LAP/RESET] to reset back to zero.
Setting the alarm
In normal display mode:
1. Hold in [MODE] for approx. 3 seconds. “MON” and the hour display
will begin to flash. Set the desired hour by pressing [LAP/RESET]
until you reach the desired hour.
2. Press [ST./STP], “MON” and the minute display will begin to flash.
Press [LAP/RESET] the number of times required to set
the desired minutes.
3. Press [MODE] to exit alarm settings and return to normal display mode.
Setting the time
In normal display mode:
1. Hold in [MODE] for approx. 3 seconds. Press [MODE] once.
“TUE” and the seconds display will begin to flash.
Press [LAP/RESET] once to reset the seconds display.
2. Press [ST./STP.] once and the minutes display will begin to flash.
Press [LAP/RESET] the required number of times to set
the desired minutes.
3. Press [ST./STP.] once and the hours display will begin to flash. Press
[LAP/RESET] the required number of times to set the desired hours.
4. Press [ST./STP.] once and the month display will begin to flash.
Press [LAP/RESET] the required number of times to set
the desired month.
5. Press [ST./STP.] once and the day display will begin to flash. Press
[LAP/RESET] the required number of times to set the desired day.
6. Press [MODE] to exit and return to normal display mode.
12/24 hour display
In normal display mode:
Hold in [LAP/RESET] and press [MODE] once to switch display mode.
• “A” or “P” is shown after the time on the 12-hour display.
• “A” or “P” is not shown in the 24-hour display.
Displaying the alarm setting
In normal display mode:
Press [ST./STP.] and [LAP/RESET] simultaneously to display
the set alarm time.
Turning off the alarm
Press [LAP/RESET] to turn of the alarm.
Displaying the month and date
In normal display mode:
Hold in [ST./STP.] and press [LAP/RESET] to switch display mode
between date/month or month/date.
Care and maintenance
• Never try to open the casing.
• Do not press the buttons when the watch is under water.
• Moisture in the watch can cause damage to its metal parts.
Contact Customer Services if you notice moisture on the inside
of the glass.
• The watch can withstand some rough treatment, but do not
expose it to unnecessary knocks or blows.
• Do not expose the watch to extreme temperatures.
• Clean the watch using a dry, soft cloth. Avoid strong detergents
since they can damage the plastic parts of the watch.
• Avoid wearing the watch in the vicinity of strong electro-magnetic fields.
Disposal
Follow local ordinances when disposing of this product. If you are unsure
of how to dispose of this product, please contact your municipality.
Specifications
Diameter
42 mm
Batteries
CR2025
Wristwatch
Art.no 36-3695
Please read the entire instruction manual before using the product and save it for future reference. We reserve the right for any errors in text or images
and any necessary changes made to technical data. If you have any questions regarding technical problems please contact Customer Services.
