23
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© Calix. All Rights Reserved.
The following table describes the parameters.
Parameter Description
Parameter
Description
WAN
Connection List
By default there is a TR-069 connection. Another option is to create
a new WAN connection.
Delete
Select this check box to delete this WAN connection.
Enable/Disable
Enables or disables this WAN connection.
NAT
Enables or disables the NAT function.
Service
Includes four service types: VOIP, TR-069, Internet, and IPTV.
Enable VLAN
Select this check box to enable VLAN feature on WAN port. When
selected, the below VLAN ID setup, and 802.1p priority setup will
be configurable. Otherwise they can not be configured.
VLAN ID
Setup VLAN ID of WAN.
VLAN PRI
IEEE 802.1p Priority of WAN.
WAN IP
Version
Includes three options: IPV4, IPV6, and IPV4+IPV6. If IPV4 is
selected, it will be requested to enable/disable
OPTION 60 Enable
and input
Vendor Class ID
. If IPV6 is selected, it will be requested
to select
IPV6 Address/Prefix
.
WAN IP Mode
Used to select the method to get the WAN IP address. There are
three options: PPPoE, DHCP, and Static IP. If PPPoE is selected, it
will be requested to input username/password, and keep alive time.
If Static IP is selected, it will be requested to input the IP address,
netmask, gateway, Primary DNS and Second DNS address.
After the configurations are done, click
Save
button to save it.
