Calix ODC-10, Installation Manual

Page: 67 / 108

Calix ODC-80 Installation Guide
61
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© 2001-2003 Calix. All Rights Reserved.
System and Network
Configuration
Introduction
Calix iMS features
The Calix integrated Management Software (iMS) is a graphical user interface that you use
to configure and monitor all of the Calix C7 nodes on a network. With the Calix iMS, you
can:
• view a diagram of your network topology
• configure all aspects of a Calix C7 network
• manage timing and synchronization
• view current alarms
• view and clear performance monitoring registers
You start the Calix iMS by using Internet Explorer (version 5.0 or higher with the Java 1.3
plug-in) to connect to any Calix C7 node in the network. See "Configure your computer
to connect to the Calix C7".