29
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
May, 2023.
Hose Clamps Threaded through Bracket
c. Take the assembled pieces above and slip them over the attachment pole.
d. Tighten the hose clamps until snug.
Note:
The hex head screw on the hose clamp can accept a 5/16" ratchet bit for faster
tightening.
Pole Mount Bracket Attached
3.
Attach the GM1028H system to the mounting bracket:
a. Before attaching the u4hm, orient the unit so its interfaces point downward.
b. Install and tighten two of the hex screws into the back of the u4hm remembering to
leave about a 3/16" gap between the screw and the u4hm cut-out.