30
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© Calix. All Rights Reserved.
To install the fiber guide for an E7-2 mounted with an ETSI rack mount kit
1.
Unpack the fiber guide assembly from its packaging.
2.
Orient the fiber guide with the fiber management on the left outside.
3.
Position the fiber guide's flat mounting plate against the right side of the installed ETSI
mounting ear, aligning:
the threaded fasteners on the fiber guide with the clearance holes on the ETSI
mounting ear,
and
the equipment mounting holes on the fiber guide with the counterpart holes on the
ETSI mounting ear.
4.
Attach the fiber guide assembly to the ETSI mounting ear using the (2) supplied SEMS
screws.
Summary of Contents for E7-2
Page 1: ...Calix E7 2 Installation Guide May 2013 220 00320 Rev 13...
Page 2: ......
