3.
Go to
Setting
s
on your phone, turn on Wi-Fi,
and
in the wifi section,
search
and c
onnect with the wifi
name “SmartDoor”
.
4.
Open the
Smartgate APP
and
click
the
plus button on the right upper corner
Connect using an Ethernet Cable Instead of WIfi
Follow
the same
WIFI procedure
s above
for
an
ethernet connection.
5. It will connect automatically and take you to
the wireless network settings page
6. Enter your camera name, or choose “My Door”
as default
7. Enter WIFI name and WIFI password then press
binding device.
8. You should see a "binding success" popup
message if your wifi name and password was
entered correctly. Press the "OK" button.
9. Press the back button the top left to return
home.
Binding Device
10. Your camera will appear. To prevent a mismatch, wait a few seconds until the status message says
"Connected". Once connected, tap on the picture of the house to view the camera.
•
If you are having trouble connecting the Smartgate app to the camera, check to make sure your
firewall or router is not blocking the connection. Certain routers have built-in security features
that you may need to configure to allow the camera to connect.
•
This
camera is not compatible with 5Ghz routers.
• Make sure bluetooth and wifi (local network) are granted permission on the Smartgate App
Troubleshooting Connection Issues
