PGUI / PGUI32 Training Manual
34
1.1
7.2 Recalling front panel setups
Next we need to clear the present Steady State settings to make sure the setup file can be used to
restore them.
1. Change the voltage, frequency and voltage range to make sure you’re steady
state settings are different from the one you just saved.
2. Pull down the File menu and select the Open sub menu. This will show you a
list of all setup files in the working directory.
3. Select the training.stp file and click on Open. This will cause the Steady State
settings to be recalled from disk. If you have an AC Source connected, it will be
programmed with the settings from the setup file.
4. Check the main window and confirm that all settings have been restored.
