User Manual – Rev B
FCS Series II
FREQUENCY MODULATION
This test requires a numer
ual
ation ra
z. This value must be
between 0.01 Hz and 100 Hz. The frequency modulation is calculated based on the modulation
rate as defined in Figure 8-5. This test will last for a minimum of 2 minutes.
ic value eq
to the modul
te in H
Figure 8-5: Frequency Modulation
California Instruments
119
Summary of Contents for FCS Series II
Page 4: ...User Manual Rev B FCS Series II California Instruments 4...
Page 27: ...User Manual Rev B FCS Series II California Instruments 27...
Page 89: ...FCS Series II 89 Figure 5 1 FCS System Block Diagram User Manual Rev B California Instruments...
Page 95: ...User Manual Rev B FCS Series II Figure 6 1 Calibration Setup California Instruments 95...
