background image

COMPACT DISC OPERATION

Inserting a CD

• Set the Function switch to CD.
• To open the CD compartment, lift the CD door on the edge marked OPEN/CLOSE.
• Insert the AUDIO CD, printed side facing up.
• Close the cover.

* The CD-player scans the contents list of the CD.

After that, the total number of tracks appears on the display.

Playing a CD

• Press PLAY/PAUSE to start playback.

* The display shows the track number.

• Adjust the sound using the VOLUME and DBBS controls.
• For brief interruptions, press PLAY/PAUSE.

* " ll " appears on the display.

• To resume playback, press PLAY/PAUSE again.
• To stop playback, press STOP.
– The total number of tracks will then appear on the display.
– The CD player also goes to STOP position:

* if you open the CD door;
* when the end of the CD is reached;
* if you move the Function selector;
* if the batteries run down or if the power supply is interrupted.

• To take out the CD, open the CD door by lifting the edge marked OPEN/CLOSE.
• Open the CD door only if the CD-player is in position STOP.

Previous / Next

Selecting another track during play
• Press PREVIOUS or NEXT until the required track number appears in the display.

* The selected track begins to play after PLAY/PAUSE is pressed.

Starting with a particular track
• Press PREVIOUS or NEXT until the required track number appears in the display.
• Press PLAY/PAUSE.

* Play starts from the selected track.

Searching for a passage during a play

• Hold PREVIOUS down to search backwards to the beginning.
• Hold NEXT down to search forwards to the end.
Note:  This function can be described as "audibly" searching for a title. During the search,

volume is reduced and returns to its adjusted level as soon as the button is released.

5

Summary of Contents for Spirit 1776












Reviews: