8
The PA920PS works with the M319 and Q319 microphones. The Powered Companion PA has the same
amplifier, power supply and speaker compliment as the full featured PA920. It does not have the mixer
panel because it can be controlled by the PowerPro PA920.
With the integral 16-channel selectable wireless UHF receiver, it can function as a stand alone PA speaker
when using a Q319 Handheld microphone or the M319 Beltpack transmitter with a LM319, or HBM319
microphone. Although there are 5 LEDs on the front of the PA920PS only 3 lights function on this unit
because there is only one receiver. The red LED indicates RF, the amber LED is for audio, and the green
LED indicates power On.
Full Wireless Operation
Any audio from the PA920 can be transmitted to the PA920PS without wiring. There is no limit on the
number of PA920PS speakers that can be used with the PA920 within a range of 300 feet.
Audio Line Buss
When linking one PA920PS to the PowerPro PA920 via Line In, a XLR cable is connected to Audio Line
Out XLR connector on the PA920. The other end is connected to Line In XLR on the Powered Compan-
ion Speaker. The Master Volume Control on the Audio Line panel of the master will adjust the PowerPro
PA920 as well as all the Powered or Passive Companion Speakers, however the loudness needs to be
adjusted via the Master Volume Control on the PA920PS as well.
Tone Controls
The separate base and treble controls provide a wide range of adjustment for increasing or decreasing
either the bass or treble from “flat” frequency response. The center or “12 o’clock” position is flat.
Speaker out
Two 1/4” phone jacks for Switched and unswitched speaker output signals to connect to external speak-
ers. Switched output disengages main speaker, unswitched output divides output between main speaker
and passive speaker
Powered Companion Speaker PA919PS
Summary of Contents for PA920PS
Page 1: ...PA920PS PowerPro Portable PA Owner s Manual...
Page 2: ......
