─
13
─
Assembly
Step 5
1. Attach one Cable (#8) to the Left Frame (#1).
2. Attach two 4.5" Pulley (#33) to the Left Frame (#1) using:
two M10*50 BHCS (#57) four Φ11*Φ20*2 Flat washer (#60)
two M10 Nylon lock nut (#64)
3. Attach three 3.5" Pulley (#32) to the the Left frame (#1) using:
one M10*50 BHCS (#57) two M10*100 BHCS (#53)
six Φ11*Φ20*2 Flat washer (#60) three M10 Nylon lock nut (#64)
four Φ20*Φ16*Φ10.5*27 Longer pulley spacer (#7)
two Cable retainer bracket (#16)
4. Attach one 3.5" Pulley (#32) to the Pulley Bracket (#30) using:
one M10*50 BHCS (#57) two Φ11*Φ20*2 Flat washer (#60)
one M10 Nylon lock nut (#64)
5. Attach two 3.5" Pulley (#32) to the Double pulley Bracket (#28) using:
two M10*50 BHCS (#57) four Φ11*Φ20*2 Flat washer (#60)
two M10 Nylon lock nut (#64)
6. Repeat this step to complete the right side.
Note:
Hand tighten bolts and Nylon Lock nuts until machine is fully assembled.
