Caliber RDN 802BT, Manual

Page: 10 / 22

11
1. Selecting Tracks
Press the SEEK >>| Button to advance to the next track. Track numbers will be shown on the display. Press and hold SEEK >>| to
fast forward.
Press the SEEK |<< Button to go to a previous track. Track numbers will be shown on the display. Press and hold the SEEK |<< Button
to fast reverse. Press >|| button, disc will play normally. On the Remote Control, use the |<< or >>| Buttons.
2. Insert / Eject CD
Press the Eject button to open the disc window. Insert a disc into CD slot with label side up. The disc will be automatically loaded into
the unit. The unit will display the opening screen with loading status and the disc will play automatically. Press the EJECT Button to
eject the disc from the slot. If the disc is not removed from the slot within 10 seconds, it will automatically be loaded into the slot again.
When the disc is ejected and removed (or not removed), the unit will automatically switch to radio mode.
3. Audio Setup
Tap to enter audio setup which is also available in the SETTINGS LOGO in the OSD
4. Control of DVD/CD functions
The control of DVD/CD functions is by the touch menu onscreen or by remote control. The functions described below can be found in
either way. To access onscreen touch menu, touch the center of the screen and the menu will appear below. Touch the arrow button on
the right to toggle between the 4 pages of onscreen menu to adjust functions described below.
Onscreen Menu
DVD/VCD/CD Operation
Eject
Disc
Stop
Play
Pause Track
Down Track
Up
Repeat
Next
Page
Audio
Selection GO
TO VCD
Menu Play
Title
Menu Subtitle
Next
Page
Zoom + Zoom -
Navigation
Key
Random
Angle
Key
Setup
Next
Page
Ratio EQ
Next
Page