Caliber RDD 788BT, User Manual

Page: 11 / 29

3. Closing the cover
Gently push in the holder until securely
locked into place.
2. Replacing the battery
Replace the battery with the same type
and the (+) side facing up.
Adjusting the volume level
ESP function
Rotate the volume knob on the ,
or use the or button on the
remote control to adjust volume level.
access the source selecting interface:
Then you can switch between the current
playback mode and the source interface, so
that you can select the source: RADIO,
DVD, USB
AV IN,
or Bluetooth by pressing the or button
on the front panel or pressing the or
button on the remote control.
- During disc, USB, SD/MMC card playback,
press the
button to switch to a
different mode, when you next return to the
previous disc, USB, SD/ MMC card
playback mode again, the unit will resume
playing from the point that it was
interrupted.
VOL+ VOL-
MODE
front panel
Anti-theft LED Indicator
Mute on/off
Designed as a theft deterrent, the red LED
will flash when the unit is turned off and the
front panel is removed.
When the unit is switched on, press the
button to turn off the sound instantly.
Press the again to return it to the
prior sound level.
MUTE
MUTE
This unit has the electronic shockproof
feature. So that if the unit skips due to
rough road conditions, the music or video
will be uninterrupted.
In power on mode, press the button
to
(with USB device inserted), SD
/MMC(with SD/MMC card inserted),
◄ ►
- During disc, USB, SD/MMC card playback,
press and hold the
button to turn
off the unit, when you next switch on it, the
unit will resume playing from the point that it
was interrupted.
To select playback mode
Last position memory feature
MODE
POWER
General operations
Reset the unit
Power on/off
Operating the unit for the first time, after
replacing the car battery or changing the
connections, you must reset the unit.
1.Turn off the unit power.
2.Press the
( ) button and remove
the front panel, then press the
button with a ballpoint or similar object to
restore the unit to the original factory
settings.
In power off mode, switch on the unit by
pressing any button except the
( )
button or inserting a disc to disc slot USB
device to USB port or SD/MMC card to card
slot.
When the system is on, press and hold the
( ) button long to turn off the unit.
OPEN
RESET
OPEN
,
POWER
Page 09