13
18
When the AF switching mode is selected, the radio checks the signal strength of the AF all
the time. The interval of checking time of each AFs depends on the signal strength of the
current station, from a few minute for the strong station to a few seconds for the weak station.
Every time that a new AF is stronger than the current station, it switches over to that
frequency for very short time, and the NEW FREQUENCY is displayed for 1-2 seconds.
Because the mute time of the AF switching or the checking time is very short, it is
almost inaudible in case of normal program. (When AF flash on LCD, it will search for
the stronger RDS station. If AF and TP flash on LCD, it can only search for the traffic
announcement station).
In FM mode, when AF is on, SEEK, (SCAN), AUTO-MEMORY function can only receive
and save the RDS program.
10. TA [TRAFFIC ANNOUNCEMENT] BUTTON
Press the TA button shortly to turn on TA search mode.
When traffic announcement is transmitted:
1).If the unit is in Disc Play mode, it will switch to radio mode temporarily.
2).Temporarily switch over to an EON linked station when EON detects a traffic
causes interference to the receiving effect during tuning, press this button to turn
on the LOC function to display the word LOC on LCD, then tune again for the local
radio station.
8. PTY (PROGRAM TYPE) BUTTON
Press the PTY button briefly to turn on PTY mode,then press the + or - button on the
remote control or front panel to select one of PTY programs as follows:
<-->NEWS<-->AFFAIRS<-->INFO<-->SPORT<-->EDUCATE<-->DRAMA
<-->CULTURE<-->SCIENCE<--> VARIED<-->WEATHER<--> FINANCE
<-->CHILDREN<-->SOCIAL<-->RELIGION<-->PHONE IN<-->TRAVEL
<-->LEISURE<-->DOCUMENT< -->PTY NONE<-->ALARM<-->POP M
< -->ROCK M<-->EASY M<-->LIGHT M<--> CLASSICS<-->OTHER M
<-->JAZZ<-->COUNTRY<-->NATION M<-->OLDIES<-->FOLK M<-->
When PTY group is on, pressing the 6 number buttons also can select one of PTY
programs as above.
After selecting one of the PTY programs, it will display SEEK PTY and
automatically search for the station of the PTY program. If the station of the PTY
program does not exist, it will display PTY NONE and then return back to the
normal station.
Note: You can also tap the PTY icon in the radio
interface to pop up the PTY selecting interface
as right. Then use the direction icons to
page up and down, tap the name of PTY program
to select.
9. AF [ALTERNATIVE FREQUENCIES] BUTTON
When pressing the AF button briefly,the AF switching mode is selected and the AF
switching mode is displayed by AF segment in display.
Segment off: AF switching mode off.
Segment on: AF switching mode on, and has RDS information.
Segment flashing: AF switching mode on, but RDS information is not received yet.
During slow forward, press the PLAY button to resume normal playback.
The function is only for video.
4.9 Display still frame step by step
If the unit is currently playing video, press the STEP button consecutively
to display still frame step by step.
Press the PLAY button to resume normal playback.
4.10 Playback Repeatedly
4.10.1 ONE/ALL Repeat
1. In the mode of DVD playback:
Press the RPT button on the remote control to select REP CHAPTER,
or OFF.
2. In the mode of VCD(PBC OFF)/CD playback:
press the RPT button to select REP 1, REP ALL or OFF.
When it is in the state of PBC ON, during VCD disc playing, the RPT
button is not available.
3. In the mode of MP3/WMA playback:
Press the RPT button to select REP 1, REP DIR, REP ALL or OFF.
4.10.2 A-B Repeat
Press the
A-B
button
if you want to repeat a specific segment on a disc
that you define:
1. Press the
A-B
button at a point (A) where you want it to be the start point
of the repeat segment. Press the
A-B
button again at a point (B) where you
want it to be the terminal point of the repeat segment. Then it will play the
segment repeatedly.
2. To cancel the A-B repeat mode and resume normal playback, press the
A-B
button for the third time.
Note:
During DVD/VCD/MP3/WMA/CD playback, points A and B must be within the
same track.
REP TITLE, REP ALL
