Caliber MCM 1102, Manual

Page: 12 / 18

11
l
Dispose of used batteries property.
l
Do not dispose of used batteries throwing them into fire. If you do so, they
may explode.
l
Do not short the positive (+) and negative (-) terminals.
l
Keep the battery and its holder away from young children.They may
choke on the battery while attempting to swallow or chew on it.
Note: The battery type must be CR2025. Do not replace with any other
battery type.
Procedure
1. Turn the remote up-side-down.
2. Simultaneously slide the battery latch in the direction of the arrow and pull
the battery holder out of the slot.
3. Remove the old battery.
4. Place the new battery in the slot with the plus(+) side up.
5. Push the battery holder back into the slot until it locks in place.
Play USB device and SD/MMC card
1. Insert a USB device into the USB socket of the main unit.
2. Touch
SOURCE button on the panel or press SRC button on the remote
control for more than 2 seconds to switch to the USB mode. The system
will play USB device automatically .
3. Use the arrow buttons to select a file type and press enter to play it .
4. Playing SD/MMC card is the same operation of USB device , please refer
to the steps of playing USB device.