searches AF. The unit doesn't search this
AF (DIP) for few minutes. In the case of the
AF of NO RDS signal with high field
strength, if the real AF is wrongly masked
as DIP by some interference, the unit
hesitates to search real AFs. For this
reason, the unit has the user option (MASK
DPI) which doesn't mask the AF of NO RDS
signal with high field strength. In MASK DPI
mode, the wrong sound or long mute
(according to PI SOUND or PI MUTE) can
be heard from the AF station which has NO
RDS signal and of which the field strength is
higher than that of the currently tuning AF
(station). But, these phenomenons are rare
and the user will hardly hear the wrong
sound in whole Europe.
Mask only the AF which has different PI.
Mask the AF which has different PI and
NO RDS signal with high field strength.
Press
button to operate as the
conversion of each display mode as
follows:
In radio mode: PS ->CT ->FREQ ->PTY
In CDP mode:CDP ->CT ->(ID3 TAG) -
>PS ->FREQ ->PTY
* In case of no receiving CT or PTY
Information, the display shows as “NO
CLOCK” or “NO PTY”.
- MASK DPI mode:
- MASK ALL mode:
DISP
- In case of receiving a RDS station
- BEEP 2’ND mode:
PRESET
1-6
BND/LOU
AMS/MP3
- BEEP ALL mode:
- BEEP OFF mode:
BND/LOUD
The beep is only heard when the second
function of the dual function button is
pressed long (2 sec). e.g.
When
button(
) is pressed.
When
button is pressed.
When
button is pressed.
When
button is pressed.
When
button is pressed.
The beep sound is heard when every key
is pressed.
The beep is disabled.
Press the
for 2 seconds to
reinforce the bass output. Press it for a few
seconds again to cancel the function.
Loudness Function
INFORMATION DISPLAY
- In case of receiving a non RDS station
Notes:
EQ
1. When a call comes in
In radio mode: “NO CLOCK” ->FREQ-
>”NO PTY”
In CD mode:CD -> NO CLOCK -> FREQ -
> “NO PTY”
Each displaying time is several seconds,
and come back to 1'st position after several
seconds.
CT = clock time
FREQ = frequency.
Press the
button to turn on the
equalization function and to select desired
audio mode. There are four kinds of mode
as below:
Exhibit current frequency and activated
functions on the LCD display.
The led display will flash if the front panel is
not inserted into the main unit.
When a call is received, 'TEL CALL' is
displayed and all the unit functions are
temporarily interrupted.
Equalization
LCD DISPLAY
FLASHING LED
ESP FUNCTION
TEL Mute
The audio system automatically mutes
whenever a call comes in.
Note: the function will not work if a cable is
not connected to the car phone.
To select playback mode
In power on mode, press
button
repeatedly to select the different modes as
the following sequence: RADIO, DISC (with
a CD/MP3/WMA disc inside the disc slot) ,
USB(with a USB device inside the USB
port), SD card(with a card inside the card
slot) or AUX mode.
MODE
This unit has the electronic shockproof
feature. So that if the unit skips due to rough
road conditions, the playback of the disc /
USB / SD will be uninterrupted.
BEEP 2’ND/ALL/OFF
Summary of Contents for MCD-163
Page 19: ......