Serial IO Hardware Setting (ROCKET / 2)
To use a Comtrol Rocketport card as the second serial board, the DIP switches on the board must be set to
the configuration shown below:
Please note, that the use of a Rocketport card as the second board only is permissible if the first board in
the VLC also is a Comtrol Rocketport.
Serial IO Hardware Setting (ROCKET / 3)
To use a Comtrol Rocketport card as the third serial board, the DIP switches on the board must be set to
the configuration shown below:
Please note, that the use of a Rocketport card as the third board only is permissible if both, the first and the
second board also are Comtrol Rocketport cards.
Serial IO Hardware Setting (INTELLIO)
Moxa Intellio boards are configured by setting a jumper on the board to select the IRQ and a DIP switch
located at the card's bracket. The table below shows the settings for this card.
Card 1 at 0xdc000, IRQ 11:
Jumper Setting:
Switch Setting:
Card 2 at 0xd8000, IRQ 5:
Jumper Setting:
Switch Setting:
Card 3 at 0xd4000, IRQ 10:
Jumper Setting:
Switch Setting:
(C) 2020, SatService GmbH
www.satnms.com
VLC-IM-2002 Page 28/39
