CALEFFI SATK Series, Instruction Manual

Page: 12 / 56

4
INST
ALLER
4 - Installation
1. The SATK’S remote control device
must be installed only by expert
personnel. To correctly install the
device and in compliance with the
regulations in force about electrical
appliances, use a dedicated cable
raceway to connect it. In case this
is impossible, any interference due
to electric wires may c ause poor
working of the remote control device.
When used as a room thermostat,
install the SATK’S remote control
device at approx. 1.5 m over floor in
a place suitable for correct sensing of
the room temperature. Do not install
behind doors, curtains, near heat
sources nor expose to direct sunlight
or water sprinkles.
NO
NO
1.5 mt
NO
YES