background image

Thermal shutoff

In the event of a failure of either the hot or cold supply, the piston will shut off, stopping water 
discharging from the mixed water outlet. The Caleffi 

5213 series thermostatic mixing

 requires a 

minimum temperature differential from hot inlet to mixed water outlet of 18°F (10°C) to ensure the 
correct operation of the thermal shutoff feature.

COLD

HOT

MIXED

4

Sweat version

Operating principle

The thermostatic mixing valve mixes hot and cold water in such a way as to maintain constant set 
temperature of the the mixed water at the outlet. A thermostatic element is fully immersed into the 
mixed water. This element then contracts or expands causing movement of the piston, closing 
either the hot or cold inlets, regulating the flow rates entering the valve. If there are variations of 
temperature or pressure at the inlets, the internal element automatically reacts to restore the original 
temperature setting. In the event of a failure of either the hot or cold supply, the piston will shut off, 
stopping water discharging from the mixed water outlet. 

NPT version

COLD

HOT

MIXED

sweat connections

version

COLD

HOT

MIXED

connections

Compression version

PEX crimp version

Summary of Contents for 521352A

















Reviews: