3
ASSEMBLY AND SETUP INSTRUCTIONS
1. Pull the Seat Leg Assembly out of the Seat Chair Assembly and set it aside for the moment. Photo 1
2. Pass two of the M6 Screws through the Backpack Strap Hook as shown. Photo 2
3. Using the remaining M6 Screws and Washers and the Backpack Strap Hook, attach the Clamp Bar to the Chair
Seat Assembly as shown. Then firmly tighten the screws using the hex key provided. Photo 3a-d
Photo 1
Photo 2
Photo 3a
Photo 3b
Photo 3c
NOTE: There are two sets of holes in the clamp bar, most
users will find the rear set of holes provides the
most comfortable fit, but the other set can be
used to move the Swing-Arm assembly closer to
the shooter.
NOTE: The clamp can be assembled for either right or
left-handed shooters. For a right-handed shooter,
the knob should face to the Left, as seen when
sitting in the chair. Photo 3d
Photo 3d
Chair mesh removed for clarity
