4
Working Safely Inside the Mac Pro.
Make sure to discharge any potential static electricity before you touch any
components inside. To do this, simply touch the outer chassis of the Mac
Pro before handling any components internally or installing any internal
components. We also recommend using an anti-static wrist band, which can be
purchased at any computer components store.
To avoid generating static electricity, do not walk around the room until
you have finished working inside the workstation and have replaced the
cover, (walking on carpeted surfaces enhances the effect of static electricity).
To minimize the possibility of damage due to static discharge, again, we
recommend wearing an antistatic wrist strap while you work inside the
workstation.
Preparing to install CalDigit RAID Card
Please make sure the jumper of the card is installed on 2, 3.
If you want to use BootCamp in your Mac Pro, you will need to make sure the
jumper is installed on 1, 2. You will also need to purchase an optional
CalDigit
Mini-SAS cable
(*1).
(
a
)
If you are using a PC, please purchase a
CalDigit Mini-SAS to SATA cable
(*2)
for your internal hard drives.
(
b
)
If you purchased a
CalDigit RAID card back-up battery pack
(*3), Please
install it to the RAID card and make sure the 3 screws are tightened at this
time.
BootCamp
Default
Summary of Contents for RAID Card
Page 1: ...Getting Started ...
