Page 18
AUXILIARY PANEL
AUXILIARY CONTROL PANEL BUTTONS
The auxiliary control panel, conveniently located opposite the main
control panel allows the user to activate the jets and lights.
JETS BUTTON
There are two buttons which affect the jet pumps. Pressing any JETS
button once displays the jets symbol on the main control panel display.
The symbol will remain displayed until the jet pump is turned off (see
chart below), or after one hour of continuous operation when the pumps
are automatically shut off by the control system.
GENEVA , NIAGARA, TAHITIAN, FLORENCE & PROVENCE
models:
JETS 1 button
JETS 2 button
1st press:
pump 1 on
pump 2 on low speed
2nd press:
pump 1 off
pump 2 on high speed
3rd press:
N/A
pump 2 off
CANTABRIA
model:
JETS 1 button
JETS 2&3 button
1st press:
pump 1 on low seed
pump 2 on low speed
2nd press:
pump 1 on high speed pump 2 on high speed
3rd press:
pump 1 off
pump 2 & 3 on high speed
4th press:
N/A
pump 2 on low & pump 3 on high speed
5th press:
N/A
pump 2 off & pump 3 on high speed
6th press:
N/A
pump 2 & 3 off
LIGHT BUTTON
The “LIGHT” button activates the
SPAGLO
multi-zone lighting system
and controls the intensity of the light. Pressing the “LIGHT” button
operates the light as follows:
• 1st press of the “LIGHT” button: all lights on.
• 2nd press: topside lights off.
• 3rd press: waterfall light off.
• 4th press: Underwater lights and
EUPHORIA
Jets lights on
medium intensity; external lights on full intensity.
• 5th press: Underwater lights and
EUPHORIA
Jets lights on
low intensity external lights on full intensity.
• 6th press: Underwater lights and
EUPHORIA
Jets lights off
external lights on full intensity.
• 7th press: all lights off.
If any lights are left on, they will automatically be turned off by the
control system after six hours of continuous operation. The light icon on
the control panel will also turn off when the lights are deactivated.
If the light will not turn on, make sure SPA LOCK is deactivated. SPA
LOCK disables the controls on both the main and auxiliary control panel.
(See the SPA LOCK section for more information on the SPA LOCK
feature.)
CANTABRIA ULTRAMASSEUSE
CONTROL PANEL
The
UltraMasseuse
system turns on automatically in the
UltraMasseuse
lounge when jet pump 3 is activated. At this time, all the jets are on, and
only the Speed indicator light is on. Pressing the Sequences button begins
the jet massage.sequences button. See Sequences on next page.
GENEVA, NIAGARA, TAHITIAN
FLORENCE & PROVENCE
JETS 1 button
Activates jet pump 1
LIGHT button
Activates the interior
& exterior lighting
JETS 2 button
Activates jet pump 2
& Waterfall
Operating Instructions
CANTABRIA
JETS 1 button
Activates jet pump 1
and waterfall
LIGHT button
Activates the interior
and exterior lighting
JETS 2 & 3 button
Activates jet pumps 2
and 3 and waterfall
Massage Sequence Indicator Lights
Speed button
Determines the
amount of time
between steps in a
jet sequence
Pause button
Interrupts sequence and
prolongs jets
Sequences button
Selects pre-
programmed jet
sequence
