background image

Owner’s Manual

This Owner’s Manual will acquaint you with the operation and general maintenance of your new spa. We suggest that you
take some time to carefully review all sections. Please keep this manual available for reference.

If you have any questions about any aspect of your spa’s set-up, operation or maintenance, contact your authorized Caldera
dealership. They are trained professionals who are familiar with the product as well as new spa ownership concerns. Their
expertise will facilitate the enjoyment of your new Caldera spa.

The serial number/identification label is located within the equipment compartment of your Caldera spa. The serial number
should also be documented on the delivery receipt from your dealer.

IMPORTANT:

Watkins Manufacturing Corporation reserves the right to change specifications, or design, without notification

and without incurring any obligation.

DATE PURCHASED:  ________________________________________

DATE INSTALLED:____________________________________________

DEALER: ____________________________________________________

ADDRESS: __________________________________________________

TELEPHONE: ________________________________________________

SPA MODEL/SERIAL NUMBER: ______________________________

COVER SERIAL NUMBER: ____________________________________

In most cities and counties, permits will be required for the installation of electrical circuits or the construction of exterior surfaces (decks and gazebos).

In addition, some communities have adopted residential barrier codes which may require fencing and/or self-closing gates on the property to prevent

unsupervised access to a pool (or spa) by children under 5 years of age. Your Caldera spa is equipped with a locking cover that meets the ASTM

F1346-91 Standard for Safety Covers, and as a result, is usually exempt from most barrier requirements. As a general practice, your local Building

Department will inform you of any applicable barrier requirements at the time a permit is obtained for the installation of an electrical circuit. Your Caldera

dealer can provide information on which permits may be required.

WELCOME

Watkins

®

Manufacturing Corporation congratulates you on your decision to enjoy the finest spa

available...  Welcome to the growing family of Caldera

®

Spa owners.

MODEL:  MARTINIQUE

SERIES: PARADISE
SERIAL:  MAA1J1001
RATINGS: 240V, 60Hz, 40A

1280 Park Center Dr., Vista, CA 92081
Watkins Manufacturing Corp.

MAA1J1001

MAA1J1001

MAA1J1001

MAA1J1001

Summary of Contents for Moorea









































Reviews: