CALDER 21001119, Operating Manual

Page: 19 / 64

P/N 96654, Rev. 0 Page 5
1.6 R
ISK ASSESSMENT CHECKLIST
The following checklist is not intended to be an all inclusive list of things to watch
out for when setting up and operating this valve testing machine. However, these
checklists are typical of the types of risks the assembler and operator should con-
sider. Use these checklists as part of your risk assessment:
T
ABLE
1-1. R
ISK ASSESSMENT CHECKLIST BEFORE SET
-
UP
Before set-up

I took note of all the warning labels on the machine.

I removed or mitigated all identified risks (such as tripping, cutting, crushing, entan-
glement, shearing, or falling objects).

I considered the need for personnel safety guarding and installed any necessary
guards.

I considered the potential hazards that are inherent in high-pressure valve testing,
including the possibility of high velocity fluid escape or workpiece fragmentation,
and have installed appropriate protective barriers.

I read the machine assembly instructions (Section 3) and took inventory of all the
items required but not supplied (Section 2.3).

I considered how this machine operates and identified the best placement for the
controls, cabling, and the operator.

I evaluated and mitigated any other potential risks specific to my work area.
T
ABLE
1-2. R
ISK ASSESSMENT CHECKLIST AFTER SET
-
UP
After set-up

I checked that the machine is safely installed (according to Section 3).

I identified all possible pinch points, such as those caused by rotating parts, and
informed the affected personnel.

I followed the required maintenance checklist (Section 5).

I checked that all affected personnel have the recommended personal protective
equipment, as well as any site-required or regulatory equipment.

I checked that all affected personnel understand and are clear of the danger zone.

I evaluated and mitigated any other potential risks specific to my work area.