U
SER’S
G
UIDE
— 23
MEASURING COMPLEX POLYGONS
OPERATING SEQUENCE
1. Press the [ON/CLEAR] key twice to clear the display.
Place the crosshairs over the fi rst point and press the
[MEASURE]
key.
2. Move to the second point and press the [MEASURE] key.
3. Move to the third point and press the [MEASURE] key.
4. Move to the fourth point and press the [MEASURE] key.
5. Move to the fi fth point and press the [MEASURE] key.
6. Move to the sixth point and press the [MEASURE] key.
7. Move to the seventh point and press the [MEASURE] key.
8. Move to the eighth point and press the [MEASURE] key.
The accumulated Lengths of the seven measured
segments will be displayed.
1
3
2
6
7
5
4
1
5
6
7
8
2
3
4
AREA
PERIMETER
9. Press the [CLOSE+] key.
The total Area is displayed.
Once a measurement is
closed, press the [PERIM]
key to display the Perimeter.
9
8
9
