USING THE LASER DIMENSION MASTER 165-BT
Buttons
Power On/Measure:
Press
once
to turn power on. While unit is on, press
once to turn laser on, press again to
measure (beeps once). To save battery
power, the laser shuts off automatically
after 30 seconds of non-use. The device
turns off after 10 minutes of inactivity.
Behavior depends on which mode the device
is in, as specified below.
•
Linear, Area, Volume measurement modes:
used
to add and subtract measurements
•
Bluetooth selection mode:
used to turn Bluetooth
on or off
•
Reference Point mode:
used to change the
measurement Reference Point to either top/front-
end or bottom/back-end of the device. Flashing
upper-left indicator reflects current setting.
•
Memory mode:
used to scroll forward and
backward through the last 50 measurements
•
Units mode:
used to scroll forward and backward
through available units of measurement
Repeated presses scroll through the Measuring
modes, Reference Point mode, Memory mode and
Units mode.
Enters Bluetooth selection mode, allowing you to
turn Bluetooth on or off.
2 — LDM 165-BT
On
C/Off
Func
www.
GlobalTestSupply
.com
Find Quality Products Online at:
