Entering Time and Time Code Units
To enter only hours or only minutes,
etc., use the colon key to skip to the next
time unit. For example, you would press
[ O n / C ] [ O n / C ]
[H:M:S] 3 [:] [:] 2
to enter a value of 3 hours and 2 seconds
(remember to press a time code or the
real-time key first, if necessary).
You can enter decimal seconds in real
time mode [H:M:S] only (for example,
pressing 2 [.] 32 enters 2.32 seconds).
30 NDF Unit
Keystrokes
Display*
Clear calculator
[On/C] [On/C]
0:00:00
Change mode
[30 NDF]
0:00:00:00
Hours
6 [:] [:] [:] [=]
6:00:00:00
Minutes
9 [:] [:] [=]
0:09:00:00
Seconds
7 [:] [=]
0:00:07:00
Frames*
12 [=]
0:00:00:12
Hours & Minutes
6 [:] 9 [:] [:] [=] 6:09:00:00
Hours & Seconds
6 [:] [:] 7 [:] [=] 6:00:07:00
Hours & Frames*
6 [:] [:] [:] 12 [=] 6:00:00:12
Minutes & Seconds 9 [:] 7 [:] [=]
0:09:07:00
Minutes & Frames*
9 [:] [:] 12 [=]
0:09:00:12
Seconds & Frames* 7 [:]12 [=]
0:00:07:12
* Note: You cannot enter or display frames in
real-time mode [H:M:S]. Pressing [=]
after each entry, completes that entry.
User’s Guide – 27
Summary of Contents for Frame Master II
Page 55: ...NOTES...
