42 — DigiRoller
™
Plus II
Error Codes
When an error occurs, the display will show one of the following mes-
sages:
Error 1
Attempt to enter a wheel ratio of 0%
Error 2
Attempt to add values of unlike dimensions in memory
Error 3
Attempt to move a current room with 0 length, 0
width, and non-zero height into the area key
nonE
Attempt to enter fixed distance or AutoCount mode
with zero (0) stored in the fixed distance key
Lo batt
Low battery power
FULL
Attempt to move measurement(s) into the Area
Number registers but all Area Number registers are full
OFLO
Attempt to display a value too large for display
Most errors can be cleared by pressing the
[RESET]
key.
