(cont d)
6) Press
[COUNT]
( ) to increase or
[RCL]
( ) to decrease the selected digit. Press
the
[M+]
( ) key to move to the next
digit to the right or the
[LxW]
( ) key to
move back to the left.
7) Once the desired value has been entered,
press
[SET]
to store value and exit the
programming mode.
Pressing
[ON/CLEAR]
will exit the
programming mode without saving any value as
the Custom Scale.
Entering a Custom Scale
1) Press
[MODE]
until
# OPEN
(# being
a number 1-3) appears in the scale box
display.
2) Press
[SET] [SCALE]
.
ROLL
will appear
in the main display.
3) Press
[SCALE]
again. The annunciator
will begin flashing
FT IN
for Imperial
Mode. The left-most digit flashes for
Metric Mode.
If in Metric Mode, skip to Step 5.
19 Scale Master
®
Pro
www.
GlobalTestSupply
.com
Find Quality Products Online at:
