Calcana PH Series Specifications, Installation, Operation Service And Spare Parts Manual Download Page 57

PH

-SERIES 

53 

22.0

 

WARRANTY 

Non-Transferable / Limited Warranty - Calcana Heaters 

Calcana Industries Ltd. (''the Manufacturer") warrants to the 
original owner at the original installation site that the heater 
manufactured  by  the  manufacturer  (''the  Product")  will  be 
free  from  defects  in  material  and  workmanship  for  one  (1) 
year from date of shipment from the factory. Calcana further 
warrants  that  the  heat  exchanger,  reflectors,  brackets, 
burner and burner box will be free from defects in material 
and  workmanship  for  three  (3)  years  from  the  date  of 
shipment  from  the  factory.  If  upon  examination  by  the 
Manufacturer the Product is shown to have a defect in  the 
material  or  workmanship  during  the  warranty  period,  the 
Manufacturer will repair or replace, at its option, that part of 
the Product which is shown to be defective. In no event shall 
the customer be entitled to consequential, indirect or special 
damages of any nature for defective merchandise, and in no 
instance may damages include loss of profit. Calcana reserves 
the right to inspect the system involved in any claim against 
the  warranty.  The  warranty  is  null  and  void  if  any  of  the 
components  installed  are  not  original  Calcana  parts  or  the 
installation  does  not  conform  to  the  supplied  installation 
manual. 

This limited warranty does not apply: 
a)

 

If the Product has been subjected to misuse or neglect, 
has been accidentally or intentionally damaged, has not 
been  installed,  maintained  or  operated  in  accordance 
with  the  furnished  written  instructions,  or  has  been 
altered  or  modified  in  any  way  by  an  unauthorized 
person. 

b)

 

To  any  expenses,  including  labor  or  material,  incurred 
during removal or reinstallations of the Product. 

c)

 

To any damage due to corrosion by chemicals, including 
halogenated hydrocarbons precipitated in the air. 

d)

 

To any workmanship of the Installer of the Product 

e)

 

If  Product  is  not  paid  for  in  a  timely  manner  and  in 
accordance with payment terms 

f)

 

If  Product  or  any  part  of  it  is  damaged  by  any  act  of 
nature  including,  but  not  limited  to;  hurricanes,  gales, 
tornadoes, wind snow, sleet, hail, rain, flood, fire or any 
other similar or dissimilar condition, or by normal wear 
and  tear,  which  included  marks  and/or  dents  to  the 
reflector  caused  by  improper  transportation  or 
installation. 

g)

 

If  Product  or  any  part  of  it  is  damaged  by  vandalism, 
improper use, accumulation of weight or heavy loads on 
the heater. 

h)

 

If  Product  is  damaged  due  to  lack  of  cleaning  or 
maintenance, whether routine or otherwise. 

 

The limited warranty is conditional upon: 
a)

 

Advising the installing contractor, who will in turn notify the 
distributor or Manufacturer. 

b)

 

Shipment to the Manufacturer of that part of the Product 
thought to be defective.  Goods  can only be returned with 
prior written approval of the Manufacturer. All returns must 
be freight prepaid. 

c)

 

Determination  in  the  reasonable  opinion  of  the 
Manufacturer  that  there  exists  a  defect  in  material  or 
workmanship. 

 

Repair  or  replacement  of  any  part  under  the  Limited  Warranty 
shall not extend the duration of the warranty with respect to such 
repaired or replaced part beyond the stated warranty period. 
 
All labor during the warranty period is the responsibility of the 
installing person or contractor. 
 
This  Limited  Warranty  is  in  lieu  of  all  other  warranties,  either 
express  or  implied,  and  all  such  other  warranties,  including 
without  limitation  implied  warranties  of  merchantability  and 
fitness  for  a  particular  purpose,  are  hereby  disclaimed  and 
excluded  from  this  limited  warranty.  The  warranty  cannot  be 
transferred or assigned by the Customer. All disputes arising from 
this warranty are to be governed by the laws of the Province of 
Alberta and any action to enforce this warranty must be initiated 
in the Province of Alberta. In no event shall the Manufacturer be 
liable,  in  any  way  for  any  consequential,  special,  or  incidental 
damages of any nature whatsoever, or for any amounts in excess 
of the selling price of the Product or any parts thereof found to 
be defective. This Limited Warranty gives the original owner of 
the Product specific legal rights. You may also have other rights 
which may vary by each jurisdiction. 

 

 

USA 

Calcana USA Ltd.

 

30201 County Road 49 

Loxley, AL, 36551 

Tel: 251-964-4400 

Fax: 251-964-4404 

 

 

 

 

 

 

Summary of Contents for PH Series






























































Reviews: