SECTION 7
um_tslm rev3.doc
Page 36 of 62
Rx Frequency
Rx Frequency displays the receive frequency for the channel pair. Frequencies are in MHz.
Tx Frequency
Tx Frequency displays the transmit frequency for the channel pair. Frequencies are in MHz.
Tx Power
Power displays the Power Output Adjust value for the channel pair. The default value is 200
(5 watts). This value should be left at the default value unless:
•
a lower power is required to meet regulatory requirements or
•
the user’s application requires an increase in the transmit duty cycle
Default Freqs
The Default Freqs button forces the Rx and Tx Frequencies to their factory default values,
based on radio type and range.
Default Power
Default Power returns to TSLM to factory set power levels.
Tx Power (0-220) is a ratio of full-power where 220 is full power and 128 is less than half-
power.
7.2.2 Version
Request
Figure 7.5 Version Request Screen
Selecting Version Request causes the TSLM Field Programming Software to display
information about the version of the TSLM hardware and firmware.
7.2.3 READ / Copy / Program TSLM PARAMETERS
Read/Program TSLM parameters is performed when the TSLM is offline and connected the
programming
cable.