Apply power to the LMU-5541
™
, then view the terminal emulation screen.
Enter <B> to break the u-boot.
Net: FEC [PRIME]
Normal Boot
Hit 'B' to stop autoboot: 0
LMU5530-Boot >
The command prompt
“LMU-5541-Boot >”
will appear.
Type:
call
<enter>
LMU5530-Boot > call
When completed,
“LMU5530-Boot >”
will appear.
Type:
boot
<enter>
LMU5530-Boot > boot
LMU-5541 Hardware & Installation Guide
43/49
8.5 Programming the Co-Processor
Occasionally, a Co-Processor update will be required in conjunction with the LMU Firmware update. Use this section for such cases.
WinSCP will be used to transfer the firmware for the co-processor into the Linux system after it is running.
Launch WinSCP
Select File Protocol:
SCP
Enter Host Name:
192.168.1.55
Enter Port Number:
2001
Enter Username:
root
Enter Password:
wireless3g
Click on Login
A new WinSCP screen will appear. On the left side, browse for C:\tftpboot
The right half should be pointed to the /root directory in the LMU-5541.
LMU-5541 Hardware & Installation Guide
44/49
Transfer the file called LMU7030-CoProc_vX.X.bin via SCP over to root. Drag the file LMU7030-vX.X.bin across the screen to the root side.
On the Terminal Emulation screen, press <Enter> to bring up the LMU5530 login:
Username:
root
Password:
wireless3g
Type:
ls
<Enter> (to view the name of the bin file)
Type:
lmu5530_program_stm8.sh /root/<file_name.bin>
<Enter>
Note:
the bin file name is case sensitive and must be entered exactly as shown.
The co-processor, STM8, is being programmed.
LMU-5541 Hardware & Installation Guide
45/49
Programming is complete when “success” is returned and the
“root@LMU5530:~#”
prompt is displayed.
To view co-processor info type:
stm_cli --info
9 CalAmp Locations
CalAmp's Corporate headquarters is located in Irvine, CA, with many divisional and satellite locations across the United States as well as
internationally.
Corporate Headquarters
15635 Alton Parkway, Suite 250
Irvine, CA 92618
Additional Locations
2400 N Glenville Dr,
Richardson, TX 75082
6483 City West Parkway
Eden Prairie, MN 55344
2200 Faraday Ave, Suite 220
Carlsbad, CA 92008
10 License Agreement
FOR SOFTWARE, APPLICATION PROGRAMING INTERFACES (APIs) & DOCUMENTATION
IMPORTANT: DO NOT INSTALL OR USE THE SOFTWARE OR DOCUMENTATION UNTIL YOU HAVE READ AND AGREED
TO THIS LICENSE AGREEMENT.
This is a legal agreement between you, the Customer, and CalAmp Wireless Networksorporated (“CalAmp”). By installing and/or using the
software or documentation, you are consenting to the terms of this License. If you do
not agree to the terms of this non-exclusive License Agreement, DO NOT INSTALL OR USE THE SOFTWARE, APIs OR
DOCUMENTATION. For a full refund, return the unused media package and all accompanying
materials within seven (7) days to CalAmp.
Where there is no packaging or media, use of the software and/or documentation constitutes
acceptance.
Definitions:
As used in this License Agreement, “Software” means CalAmp’s LM Direct
™
, LMU Manager
™
, LapTop Locator
™
, LMU
Application/Programmable Event Generator
™
, CDMA LMU Provisioning Tool,
GPRS LMU Provisioning Tool, iDEN
™
Provisioning Tool, LMU Status, Clone Config, Hex Dump, LM Exchange
™
Traffic Monitor, Freewave
Base Station Config, Remote Serial Port, App Watcher Service and/or other
