6.
SPECIFICATIONS
GENERAL
UHF
700MHz
800 MHz
Frequency Range (MHz)
FCC
403 - 512 Rx/Tx
1
IC
406 - 470 Rx/Tx
ACMA
450-512 Rx/Tx
FCC (part 90)
796 - 803 TX
766 - 773 RX
FCC (part 27)
792 - 794 TX
762-764 RX
FCC
809 - 824 TX
854 - 869 Rx
IC
806 - 821 Tx
851 - 866 Rx
FCC Part 90
I.C. RSS-119
FCC Part 90, 27
FCC Part 90
I.C. RSS-119
Channel spacing
12.5 kHz / 25 kHz
50 kHz
25 kHz / NPSPAC
Frequency Control
Digital Synthesizer / uController
Frequency Stability
1.0 ppm
Data Encryption
AES 128-bit
Operating temperature
-30°C to +60°C (25°C nominal) @ 95% non-cond. RH
Mode of Operation
Half Duplex
Number of channels
32 internally stored, over-the-air
programmable
Power Supply voltage
13.8Vdc nominal (negative ground)
10.9 – 16.3 VDC
Circuit Protection
15 Amp fuse external,
Internal crowbar diode for reverse polarity protection
RX Current at 13.6 VDC
< 750 mA Standby (with GPS receiver)
TX Current at 13.6 VDC
< 12 A
TX/RX separation
any, 5 MHz typical
30 MHz typical
45 MHz typical
Size
6.0” W x 2.0” H x 7.1” D
Weight:
< 4.5 lbs.
RF input/output Impedance
50 ohms nominal
Antenna Connector
1 primary female Tx/Rx, 1 auxiliary female Rx
GPS Connector
SMA
User Interface
Ethernet RJ45 Auto-MDIX 10-100/T with LED status indicators
Dual RS-232 DE-9F Serial Ports configured as Terminal Servers
USB Port (future use)
MODEM / NETWORK
1
WARNING
:
The frequency band 406 to 406.1 MHz is reserved for use by distress beacons and should not be pro-
grammed into the unit.
84
